Bauma 2019: First Glimpse Of New 120-Ton Link-Belt RT

    Posted On: March 7, 2019

    The new 120-ton (110-metric ton) rough-terrain crane from Link-Belt. (Photo courtesy of Link-Belt Cranes.)

    This post is courtesy of Link-Belt Cranes.

    Link-Belt Cranes will introduce the never-before-seen 120|RT 120-ton (110-metric ton) rough-terrain crane to the world at bauma 2019 in Munich, Germany, booth number F903/3. Owners will appreciate their return on investment with this 120|RT for its true 120-ton lift chart and operating efficiencies, while operators will continue to reap the benefits of Link-Belt’s continued crane design innovations, providing greater efficiency and comfort.

    Boom & Attachment

    The 120|RT delivers outstanding reach with a six-section 38.3- to 164.1-foot (11.6- to 50-meter) pin and latch formed boom, built to Link-Belt’s specific boom profile and tolerances at their Lexington, Kentucky, USA facility. An available two-piece (35- to 58-foot [10.7- to 17.7-meter]) on-board offsettable fly provides greater flexibility and range, and manually offsets at 0, 15, 30, and 45 degrees. One-person fly erection technology minimizes work at height with ground controls for fly assist and boom hoist cylinders. Two 16-foot (4.9-meter) lattice insert extensions provide a maximum tip height of 261.7 feet (79.8 meters).

    Carrier

    The 120|RT’s six-speed transmission is powered by a dual compliant Cummins Stage V/Tier IV QSB 6.7L 232 horsepower (173 kilowatt), and also available is a Cummins Tier III QSB 6.7L 240 horsepower (179 kilowatt) diesel engine. Four 29.5x25 tires mounted on axles affixed to the carrier via greaseless 4-link suspension, eliminating ten previous grease points. Centralized electrical locations, remote mounted filters, and easy-access fluid checks make routine service a breeze.

    A 24-volt electrical system makes running diagnostics quicker and easier. The wiring is a Controller Area Network (CAN bus) system. The 24-volt system yields the ability to multiplex with modules placed near dedicated functions like outrigger beams and winches. In total, there are five modules located throughout the machine that allow crane functions to continue working in instances where other modules are being diagnosed or serviced.

    Six points of access to the carrier deck are maintained with new ergonomic ladders, and regardless of slew angle, the operator has easy egress to the flat deck from the cab. The 120|RT exterior features all new durable textured paint, along with a new slip-resistant paint on the carrier deck to provide better footing for access and egress with flat deck and six points of access.

    V-CALC – RT Simple

    Link-Belt’s V-CALC (Variable Confined Area Lifting Capacities) system features 81 different outrigger configurations with real time 360-degree charts. V-CALC has proven itself in general construction and infrastructure applications on the 75|RT. Once outriggers are set, the user-friendly Pulse 2.0 system indicates the crane’s available capacity. The system then previews the operator’s real time capacities given the crane’s current configuration at the next five radiuses for a set boom angle.

    Upon selection, Link-Belt Pulse 2.0 provides a live view of the working area with color-coded quadrants. If the chart exceeds capacity at a given slew angle, swing arrest will initiate five degrees prior—allowing the crane to come to a smooth stop.


    The new 120-ton (110-metric ton) rough-terrain crane from Link-Belt. (Photo courtesy of Link-Belt Cranes.)

    Upper

    High-strength steel used in the upper frame accommodates a new winch design with ultra-wide drums for increased line pull at higher working layers. Maximum winch line pull of 23,632 pounds (105.1 kilonewtons) provides a wider range of applications and contractor needs. Hydraulic outboard routings and wiring harness improvements offer form-fitted design, providing greater serviceability over the life of the crane. Three slabs of hydraulically removable upper counterweight totaling 28,800 pounds (13.1 metric tons) is standard equipment.

    Cab

    Introduced on the 75|RT in 2017, Link-Belt’s new cab design for its rough-terrain cranes has been well received in the field, both in terms of visibility, operator comfort and intuitive design. All electrical components coming into the cab are bulk headed for “plug and play” assembly. Specific cab specifications include the following:

    • 20 degree tilt
    • Ergonomic seat with electronic joystick/single axis controllers
    • Automotive-type, high capacity HVAC system
    • Increased storage and interior lighting
    • Time delayed wipers
    • USB and 12-volt power supply connections
    • Van-style pop out door

    Link-Belt Pulse 2.0

    Based on ongoing operator and customer feedback, Link-Belt Pulse 2.0 provides a simple interface for crane operators with a large 10-inch (25.4-centimeter) touchscreen display, along with customizable programmable features. Link-Belt Pulse 2.0 can be updated and serviced remotely. Wi-Fi enabled, the system uses the serial number of the unit to determine if any updates are available, and download/installs to the appropriate controls.

    Continuing A Focus On Work Conditions, Day Or Night

    Link-Belt carefully considers the location of swing out engine access doors and centralized electrical locations—keeping them accessible from the ground or near a grab handle or ladder. Transmission oil, engine oil, primary and secondary fuel filters, as well as the engine oil filter are mounted for easy reach.

    The 120|RT has been fitted with all the necessary tools to get the job done, any time of day:

    • Dual amber strobe lights
    • LED working lights
    • Outrigger lights
    • Work platforms on the upper with guardrails
    • Operator programmable function kick outs
    • Telematics in place to give real time data to better forecast maintenance and service needs of the crane

    Link-Belt’s camera vision package on the 120|RT enhances on-board site monitoring and includes a back-up camera, as well as cameras for viewing winches and the right side of the upper.

    Transport At Under 100,000 Pounds

    The 120|RT will transport with base unit fully equipped minus modular counterweights at 94,472 pounds (42,852 kilograms). With an overall height of 12 feet 10 inches (3.91 meters), this rough-terrain can be driven right off a conventional lowboy trailer, assemble counterweight and be ready to go to work!

    Link-Belt Cranes, with headquarters in Lexington, Kentucky, is a leader in the design and manufacture of telescopic boom and lattice boom cranes for the construction industry worldwide.

    Complete crane specifications are available at www.linkbelt.com.

    If you’re looking for new and used Link-Belt cranes, you’ll find hundreds for sale on CraneTrader.com, including a wide range of used Link-Belt rough-terrain cranes.

      Blog Archive
    Pre-AuctionTime Provides A Nothing-To-Lose, Everything-To-Gain Approach To Auctions
    Posted 11/11/2026
    Pre-AuctionTime lets sellers advertise assets at retail and wholesale ahead of the scheduled auction date and evaluate offers from interested buyers as they roll in. ...
    Read the full blog post
    Used Truck & Trailer Inventory Down In October As Semi-Trailer Auction Values Jump Nearly 20%
    Posted 11/6/2026
    The newest Sandhills Global market reports, which cover October data for used trucks and equipment on TruckPaper.com, TractorHouse.com, MachineryTrader.com, and other Sandhills platforms, underscore inventory declines across most market segments. ...
    Read the full blog post
    What's New At Sandhills Global
    Posted 11/2/2026
    Learn about the latest Sandhills features, including the new VIP+ Dashboard inventory overview, the Sandhills System business system, and My Consignments. ...
    Read the full blog post
    Equipmentfacts Brings The Local Auction Ring To The World
    Posted 10/28/2026
    Live auctions used to have limited reach and a local pool of bidders, but Equipmentfacts’ simulcasting technology opens live auctions to bidders everywhere. ...
    Read the full blog post
    Extend Your Sales Reach To Canada & Latin America With MarketBook
    Posted 10/27/2026
    The MarketBook Canada and MarketBook Latin America platforms connect farm and construction equipment and truck and trailer sellers and buyers through proven regional print publications and localized websites. ...
    Read the full blog post
    Fast Track Iron Dealer Network Unlocks Wholesale & Exclusive Benefits
    Posted 10/26/2026
    Sandhills’ Fast Track Iron dealer network offers wholesale buying and selling, valuable information on asset listings, and exclusive sales tools. ...
    Read the full blog post
    Get Precise Asset Valuations With Value Insight Portal (VIP)
    Posted 10/26/2026
    VIP is a publicly available, mobile-friendly tool offering the industry’s most accurate valuations for construction equipment, farm machinery, commercial trucks, and trailers. ...
    Read the full blog post
    Sell On Your Own Terms With Standalone Timed Auctions
    Posted 10/21/2026
    Standalone timed auctions on AuctionTime let you customize the date, time, and pace of your auction to more effectively reach your target buyers. ...
    Read the full blog post
    Did You Buy Crane Equipment In 2026? The Section 179 Tax Deduction Could Save You Money
    Posted 10/16/2026
    If you bought cranes or other heavy equipment and put them to use in the 2026 calendar year, the section 179 tax deduction could help you write off and recover some of those costs. ...
    Read the full blog post
    Use Real-World Auction Results From Auction Values To Your Advantage
    Posted 10/14/2026
    Mispricing assets can be costly, which is why auctioneers, dealers, and other sellers rely on Auction Values for making data-backed pricing decisions. ...
    Read the full blog post