Link-Belt Fields New 110-Ton 218 V Lattice Boom Crawler Crane

    Posted On: April 27, 2023

    Link-Belt’s new 218 V has a 110-ton lifting capacity, a maximum tip height of 279 feet, and approximately 5% greater average capacity than its predecessor, the 218 HSL. (Photo courtesy of Link-Belt.)

    Link-Belt recently debuted its fifth-generation lattice boom crawler crane in the 218 series. The new 218 V, the successor to the 218 HSL, has a 110-ton (99.79-metric-ton) lifting capacity. Its main boom has a maximum length of 230 feet (70 meters), but with a jib it can reach a tip height of 279 ft (85 m). Extra counterweight gives the 218 V approximately 5% greater average capacity over its predecessor. Link-Belt showed off the new crane at the ConExpo-Con/Agg convention in Las Vegas, Nevada.

    “Larger cranes often get more publicity for making eye-catching big lifts, but the daily, versatile workhorse in the industry is this size of machine,” says Link-Belt Product Manager for Crawler Cranes, Brian Elkins.

    Eyes On The Job

    Link-Belt improved the operator’s visibility from the 218 V’s cab by lowering its foot pedals. The manufacturer also installed a new 12-inch touchscreen and load moment indicator operating system. The new display furnishes a live readout of stacked counterweight, swing angle, list and trim, engine rpms, upgraded diagnostics, and other data.

    A variety of high-resolution cameras with night vision give the crane operator views of the winch, rearview, and non-cab side swing. For even greater visibility, a new optional lighting package places LEDs on the upper and lower cab side, as well as on the front of the cab.

    New Car Body Counterweights

    The 218 V is a self-assembling crane that comes with a remote control for single-user operation of its counterweight removal system, which it has in common with Link-Belt’s telecrawler family. The crawler also has new front and rear car body counterweights, the former of which adds a convenient toolbox. The new weights have a hook-and-pin design and fit within the side frames, permitting extension and retraction.

    Like the 218 HSL, the new 218 V has a two-speed travel drive and uses the same lattice boom extensions. Its fixed jib adds 30 to 75 ft (9.1 to 22.9 m) of lift height in 15-ft (4.6-m) increments, and can be offset to 5, 15, or 25 degrees. The new crane’s main load can be transported at a weight of 99,960 pounds (45,341 kilograms), and 160 ft (48.7 m) of its boom can be hauled on three 50-ft (15.2-m) trailers.


    The crawler also has new car body counterweights with a hook-and-pin design and a convenient toolbox on a front unit. (Photo courtesy of Link-Belt.)

    More New Features

    The new Link-Belt 218 V comes with quick-deploying, swing-out axle extenders and new ladders and steps for access to the upper work platform. Power pack attachment points come as a standard feature; a P-Pack bracket kit is available as an option, as are floodlights for the boom.

    A new boom head offers quick-reeve capability and button-type termination, which Link-Belt says facilitates easy removal of the block and ball from a 26-millimeter (1-inch) rope. Also, all sections of the main boom now include storage retainers for safe, secure transportation of the pendant assembly no matter how much boom the job may require.

    Reduced Operating Costs

    A 280-horsepower (209-kilowatt) Cummins QSB 6.7 diesel engine gives the new 218 V its power. The EU Stage V motor is ready to run on hydrotreated vegetable oil (HVO), including as a mixture with regular diesel fuel. A Kawasaki pump and motor system makes the crane’s movements responsive even during simultaneous actions. The Link-Belt’s hydraulic oil service interval has doubled to 4,000 hours to reduce maintenance costs and downtime.

    The 218 V has an operator-activated Eco Winch feature to provide sufficient line pull for lighter loads at engine speeds under 1,000 rpm. This decreases operating cost and emissions. Another user-enabled standard feature automatically shuts down the engine after extended idling, subject to conditions.

    Find The Right Link-Belt Crane

    CraneTrader is your guide to the new and used Link Belt crane(s) you’re looking for, including Link-Belt lattice boom crawler cranes such as the 218 HSL for sale.

    Source: Link-Belt

      Blog Archive
    Pre-AuctionTime Provides A Nothing-To-Lose, Everything-To-Gain Approach To Auctions
    Posted 11/11/2026
    Pre-AuctionTime lets sellers advertise assets at retail and wholesale ahead of the scheduled auction date and evaluate offers from interested buyers as they roll in. ...
    Read the full blog post
    Used Truck & Trailer Inventory Down In October As Semi-Trailer Auction Values Jump Nearly 20%
    Posted 11/6/2026
    The newest Sandhills Global market reports, which cover October data for used trucks and equipment on TruckPaper.com, TractorHouse.com, MachineryTrader.com, and other Sandhills platforms, underscore inventory declines across most market segments. ...
    Read the full blog post
    What's New At Sandhills Global
    Posted 11/2/2026
    Learn about the latest Sandhills features, including the new VIP+ Dashboard inventory overview, the Sandhills System business system, and My Consignments. ...
    Read the full blog post
    Equipmentfacts Brings The Local Auction Ring To The World
    Posted 10/28/2026
    Live auctions used to have limited reach and a local pool of bidders, but Equipmentfacts’ simulcasting technology opens live auctions to bidders everywhere. ...
    Read the full blog post
    Extend Your Sales Reach To Canada & Latin America With MarketBook
    Posted 10/27/2026
    The MarketBook Canada and MarketBook Latin America platforms connect farm and construction equipment and truck and trailer sellers and buyers through proven regional print publications and localized websites. ...
    Read the full blog post
    Fast Track Iron Dealer Network Unlocks Wholesale & Exclusive Benefits
    Posted 10/26/2026
    Sandhills’ Fast Track Iron dealer network offers wholesale buying and selling, valuable information on asset listings, and exclusive sales tools. ...
    Read the full blog post
    Get Precise Asset Valuations With Value Insight Portal (VIP)
    Posted 10/26/2026
    VIP is a publicly available, mobile-friendly tool offering the industry’s most accurate valuations for construction equipment, farm machinery, commercial trucks, and trailers. ...
    Read the full blog post
    Sell On Your Own Terms With Standalone Timed Auctions
    Posted 10/21/2026
    Standalone timed auctions on AuctionTime let you customize the date, time, and pace of your auction to more effectively reach your target buyers. ...
    Read the full blog post
    Did You Buy Crane Equipment In 2026? The Section 179 Tax Deduction Could Save You Money
    Posted 10/16/2026
    If you bought cranes or other heavy equipment and put them to use in the 2026 calendar year, the section 179 tax deduction could help you write off and recover some of those costs. ...
    Read the full blog post
    Use Real-World Auction Results From Auction Values To Your Advantage
    Posted 10/14/2026
    Mispricing assets can be costly, which is why auctioneers, dealers, and other sellers rely on Auction Values for making data-backed pricing decisions. ...
    Read the full blog post