Western Star 47X set-back front axle cab/chassis as follows:
300” wheelbase; 230” cab to tandem Double frame
Detroit DD13 12.8L 470 HP diesel engine Allison 4700 automatic transmission
20,000# front axle and suspension with dual front steering Jake brake
44,000# rear axles with 4.10 rear axle ratio; 56” axle spacing 80-gallon aluminum fuel tank
Driver controlled differential lock forward/rear and rear/rear Engine block heater and oil preheater
46,000# TufTrack rear spring suspension Fuel/water separator
425/65R22.5 20-ply front tires on aluminum disc front wheels Air ride cab
11R22.5 14-ply radial rear tires on 10-hub pilot Alum disc wheels Heater, defroster and air conditioning
Dual west coast stainless steel heated mirrors with RH & LH remote RH and LH powered windows
New Copma Model 450.5J3 hydraulic articulating crane with full hydraulic horizontal reach of 71’9” is equipped as follows:
*Jib Lifting Capacities*
3,550 lbs. at 57’ 4”
3,220 lbs. at 61’ 9”
2,930 lbs. at 66’ 10”
2,700 lbs. at 71’ 9”
• Crane Painted Copma Grey
• Danfoss Control Valve
• Top Seat Controls
• Hydraulic Oil Cooler
• Continuous Rotation (dual rotation motors)
• Overload Relief Valves
• Hydraulic Overload Protection Valve
• High Pressure Filter
• Hydraulically Extendable XL Outriggers, Span 25’ 7”
• Hydraulic Stabilizers, Manually Rotatable
• No Electronics, No Sensors, Fully Hydraulic Crane
Installation is as follows:
• Crane to be mounted on rear.
• Full length subframe underneath crane to end of truck frame.
• Lo-profile flatbed with smooth decking; 24’ long usable 102” wide with 2” outside lip.
• Heavy duty front and rear bulkhead.
• Heavy duty ICC bumper with taillights and integrated outrigger pad holder.
• Frame mounted hydraulic tank and dual return filter system.
• Underbody winch track with seven sliding winches and straps.
• 60” toolbox, frame mounted on passenger side.
• 48” toolbox, frame mounted on driver side.
• 1 set of aluminum outrigger pads.
• (1) Pusher axle; 13,500# suspension and 22.5 tires on aluminum wheels.
• (1) Tag axle; 13,500# suspension and 19.5 on aluminum wheels.
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
