2017 XCMG (XCT80) All-Terrain Crane
Boom Length: 50 m
Jib Length: 18 m
Counterweight: 11.5 t
Core Lifting & Boom Parameters
Maximum Rated Lifting Capacity: 80 t
Basic Boom Length: 12.4 m
Main Boom Length Range: 12.4 – 47.5 m (5-section U-shaped telescopic boom)
Maximum Lifting Height (Main Boom Only): 47.5 m
Maximum Lifting Height (Main + Standard Auxiliary Boom): 62.5 – 64 m
Minimum Working Radius (Boom Radius): 3 m
Maximum Working Radius (Fully Extended Main Boom): ~38 m
Standard Auxiliary Boom Length: 15 m
Rated Capacity at End of Fully Extended Main Boom (Max Radius): ~12.5 t
Basic Boom Maximum Lifting Moment: 3060 kN·m
Hoisting & Movement Speed
Main Hoist Lifting Speed: 130 m/min (no-load), 85 m/min (full-load)
Auxiliary Hoist Lifting Speed: 110 m/min (no-load), 85 m/min (full-load)
Maximum Slewing Speed: 2 r/min
Main Boom Telescoping Time (Full Extension): 150 s
Luffing Time (Full Raise): 70 s; (Full Lower): 140 s
Chassis & Travel Performance
Maximum Travel Speed: 80 km/h
Minimum Stable Travel Speed: 3 km/h
Maximum Gradeability: 40%
Minimum Turning Diameter: 24 m
Minimum Ground Clearance: 371 mm
Approach/Departure Angle: 17° / 15.5°
Total Vehicle Mass (Travel Configuration): 50,000 kg
Axle Load (Front/Rear): 24,000 kg / 26,000 kg
Counterweight & Outrigger
Maximum Counterweight: 11,500 kg (11.5 t, standard removable counterweight)
Outrigger Span (Full Extension): Longitudinal 8.075 m × Transverse 7.9 m
Outrigger Span (Half Extension): 5.6 m × 7.9 m
Power System
Chassis Engine Model: WP12.375N / MC11.39-30
Chassis Engine Rated Power: 276 kW (375 HP) / 290 kW (390 HP)
Chassis Engine Rated Torque: 1800 N·m / 1900 N·m
Superstructure Engine: Matching high-efficiency unit (integrated power control)
Overall Dimensions
Overall Length: 14,770 mm
Overall Width: 2,800 mm
Overall Height: 3,890 mm
Wheelbase: 2380 + 2075 mm
Additional Key Specs
Drive Configuration: 8×4 drive
Control System: Full hydraulic proportional control, load moment limiter (LML)
Typical Applications: General construction, infrastructure, utility maintenance, industrial equipment hoisting
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.