2020 SANY SAC2200T

    $276,000 
    Machine Location:NO.#698,Changbang Road Gongshu District Hangzhou city Zhejiang Province ChinaHangzhou, Zhejiang, China 310042

    Seller Information

    View Seller Information

    Everglory International Group Co.,ltd

    Contact:Bonnie Yan

    Phone:+86 186 5728 7283

    SHANGHAI, China

    +86 186 5728 7283

    Hide Thumbnails

    Description

    Sany Original painting all this terrain crane 220T (SAC2200T) Year of manufacture: 2020 Main boom length: 76m Jib length : 21m Counterweight:76.5T 1. Core Lifting Performance Maximum Rated Lifting Capacity: 220 t (at 3 m minimum radius, basic boom) Maximum Lifting Moment (Basic Boom): 6664–7271 kN·m Maximum Lifting Moment (Full-extended Boom): 3190–3540 kN·m Minimum Rated Working Radius: 3 m Maximum Working Radius (Full-extended Boom): 70 m Rated Capacity at Full-boom Tip: ~2.5–2.8 t (at 73–75.5 m main boom length) 2. Boom & Jib System Boom Type: 7-section, U-shaped high-strength steel telescopic boom Basic Boom Length: 13.8–14.1 m Full-extended Main Boom Length: 73–75.5 m Maximum Combination Length (Boom + Jib): 92.6–106.6 m (standard) / Up to 107 m (optional) Auxiliary Jib Length: 16–43 m (depending on configuration) Jib Luffing Angles: 0°, 20°, 40° Maximum Lifting Height (Main Boom Only): 76 m (full extension) Maximum Lifting Height (Boom + Jib): 93–107 m 3. Dimensions & Vehicle Body Overall Length:15.53–16.43m Overall Width:2.995–3.00m Overall Height:4.0 m Load Capacity (Max Lifting) 220000kg Net Weight (Operating Weight):54670–60000kg Gross Weight (Max Total Mass):54800–60000kg Counterweight (Total):76500kg 4. Travel & Chassis Drive Configuration: 10×8×10 (5-axle, all-wheel steer) Maximum Travel Speed: 80 km/h Minimum Turning Radius: 9.5–10 m Minimum Ground Clearance: 270–325 mm Approach/Departure Angle: 16–20° / 12–17° Maximum Gradeability: 45–58% Fuel Tank Capacity: 500 L Axle Load (Front/Rear): 10.45–12 t / 10.4–11.6 t 5. Work & Operation Speed Main Winch Line Speed (No Load): 130 m/min Main Winch Line Speed (Full Load): 45 m/min Auxiliary Winch Line Speed (No Load): 130 m/min Auxiliary Winch Line Speed (Full Load): 45 m/min Maximum Slewing Speed: 1.5–2.0 r/min Boom Telescoping Time (Full Ext/Ret): 660 s Boom Luffing Time (0° to 80°): 60–90 s 6. Stability & Outriggers Outrigger Span (Long × Trans): 8.3–9.46 m × 8.5–9.045 m Tail Swing Radius: 4.85–4.86 m Total Counterweight: 76.5 t (76500 kg) 8. Environmental & Safety Operating Temperature Range: -20 °C to +40 °C Safety System: Load Moment Limiter (LMI, ±3% accuracy), overload alarm, emergency stop, anti-slip protection Hydraulic Protection: Load-sensing constant-power system with balance valves & anti-cavitation controls

    Specifications

    Year2020
    ManufacturerSANY
    ModelSAC2200T
    Upper Hours600
    ConditionUsed
    Lift Capacity242.51 ton
    Max Main Boom Length249 ft 4 in
    Max Jib Length68 ft 11 in
    Max Boom & Jib Length364 ft 2 in
    Max Lift Height364 ft 2 in
    Number of Outriggers4
    Weight of Counterweight84.33 ton
    Number of Carrier Axles5
    Year2020|
    ManufacturerSANY|
    ModelSAC2200T|
    Upper Hours600|
    ConditionUsed|
    Lift Capacity242.51 ton|
    Max Main Boom Length249 ft 4 in|
    Max Jib Length68 ft 11 in|
    Max Boom & Jib Length364 ft 2 in|
    Max Lift Height364 ft 2 in|
    Number of Outriggers4|
    Weight of Counterweight84.33 ton|
    Number of Carrier Axles5|
    Show As Paragraph

    Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.

    Your browser is not supported

    Microsoft Edge

    Google Chrome

    Mozilla Firefox