2018 PALFINGER PK23500A MOUNTED ON 2018 FREIGHTLINER 114SD
Description
STK# JDJK4702
CRANE (see specs directly below)
2018 PALFINGER PK 23500 (A) SERIES PERFORMANCE CRANE
HEAVY DUTY KNUCKLE BOOM MATERIAL HANDLING LOADER CRANE
SN:100386867 CODE: S406-SK-A MPA
TRUCK (see specs at the end of this page)
2018 FREIGHTLINER 114SD LONG TANDEM TRUCK
VIN: 3ALMG3DV1JDJK4702
CRANE SPECS
PALFINGER HEAVY DUTY KNUCKLE BOOM MATERIAL HANDLING LOADER CRANE
HEAVY DUTY KNUCKLE BOOM MATERIAL HANDLING LOADER CRANE
• Wireless Radio Remote Control
• Tethered Wire Remote Control
Functional Design
• Enclosure of the entire electronic system
• Enclosure in the area of the control valve
Ergonomic crane control
The operating levers for all crane functions are arranged ergonomically on the console. This facilitates comfortable, efficient working. The control console is mounted for easy servicing.
Return oil utilization
The extension system's high speed is impressive. It results from the return oil utilization feature, which is installed as standard, and the generously dimensioned hydraulic pipes. This increases efficiency across all types of work!
Load-holding valves
They prevent the crane arm from dropping and are mounted as standard on the elevating and knuckle-boom cylinders, as well as on the extension arm. The valves are positioned in such a way that they are protected from being damaged.
KTL – the cathodic dip painting
The shot-blasted crane parts are zinc-phosphate-coated by immersion and then electrostatically coated. The subsequent two-component topcoat provides surface protection previously found only in the automotive industry.
Extension system
The extension cylinders run on rollers. Height compensation for the extension cylinders.
Internally routed oil ducts
The internally routed oil passages enable a compact extension system design and ensure full protection against damage.
Outriggers
The 4.8 m (15' 9") outrigger system, installed as standard, ensures good stability.
VERTICAL UPREACH
From the ground up vertically, the crane's maximum boom tip height is 38' 6"
At this crane's maximum 38' 6" upright vertical boom tip position, the crane's maximum lifting capacity is 13,450 lbs.
At this crane's maximum 80-degree Boom Angle, that equates to a 20-degree tilt away from a perfectly vertical 90 degrees.
HORIZONTAL "STRAIGHT-OUT" OUTREACH
From the center of the crane's mast, the maximum boom tip outreach is 27'
This crane's horizontal boom max. lifting capacity is:
(@15' 1" 10,800 lbs.)
(@20' 0" 7,940 lbs.)
(@26' 3" 6,020 lbs.)
CRANE'S MAXIMUMS
Crane's maximum lifting capacity is 13,450 lbs.
Crane's maximum vertical upreach is 38' 6"
Crane's maximum horizontal outreach is 27'
Crane's Slewing Angle is 400˚
Crane's maximum stabilizer spread is 21' 9"
Functional Design
• Enclosure of the entire electronic system
• Enclosure in the area of the control valve
• Ergonomic crane control
The operating levers for all crane functions are arranged ergonomically on the console.
• This facilitates comfortable, efficient work.
• The control console is mounted for easy servicing.
Return oil utilization
The extension system's high speed is impressive.
• It results from the return oil utilization feature, which is installed as standard, and the generously dimensioned hydraulic pipes.
• This increases efficiency across all types of work!
Load-holding valves
• They prevent the crane arm from dropping and are mounted as standard on the elevating and knuckle-boom cylinders, as well as on the extension arm.
• The valves are positioned in such a way that they are protected from being damaged.
Outriggers
• The 4.8 m (15' 9") OR (21') outrigger system installed as standard ensures good stability.
Additional
• The PALTRONIC 50 electronic control system
• The hydraulic overload protection
TRUCK SPECS
2018 FREIGHTLINER 114SD TRUCK SPECIFICATIONS
• Detroit Diesel DD13 12.8L 470 HP / 1625 RPM 1900 GOVERNED RPM
• Engine Brake
• Eaton Fuller Transmission: RTO-16908LL "8LL" deep-reduction configuration (8 Forward regular road-speed gears + two additional deep-reduction ratios LO & LO LO gears), 3 Reverse gears, versatility for On/ Off-Highway Applications and Demanding On-Highway Duty, 1,650 lb-ft of torque capacity, severe-duty vocational transmission.
• 20,000 lb. Detroit Front Steering Axle
• Dual Power Steering Gearboxes
• 4,000 lb. Meritor MT-44-14XP Tandem Rear Drive Axles
• 4.11 Tandem Rear Drive Ratio
• 46,000 lb. TufTrac Severe-Duty Vocational Rear Suspension.
• 13,200 lb. Steerable Air Lift Air Ride Rear Tag Axle (limited by tires)
• 280 Inch Wheelbase (WB), 214 Inch Back of Cab to Center of Tandem Drive Axles (CA/CT)
• 73,200 lb. Gross Vehicle Weight Rating (GVWR)
• Power Windows, Door Locks, Mirrors
• Two-Man Buddy SeatSpecifications
Year2018
ManufacturerPALFINGER
ModelPK23500A
Upper Hours3,001
Serial Number100386867
ConditionUsed
Stock NumberJ-DJK4702
Hours MeterAccurate / Verified
Product ConfigurationTRUCK MOUNTED KNUCKLE BOOM CRANE
Operating ConditionOperable
Truck Year2018
Truck ManufacturerFREIGHTLINER
Truck Model114SD
VIN3ALMG3DV1JDJK4702
Mileage344,901 mi
OdometerAccurate / Verified
State DOTYes
Horsepower470 HP
Engine ManufacturerDetroit
Engine Serial NumberDD13
Fuel TypeDiesel
Engine BrakeYes
TurboYes
Transmission8LL
# of Forward Speeds10
# of Reverse Speeds3
SuspensionTufTrac
Twin SteerYes
Number of Rear AxlesTri
Wheelbase280 in
Gross Vehicle Weight RatingClass 8: 33,001 pounds or greater
Front Axle GWR20,000 lb
Rear Axle GWR46,000 lb
Lift AxleYes
Lift Axle TypeRear
Length42 ft
Drive SideLeft Hand Drive
Wet KitYes
Flat deckYes
Lift Capacity13,450 lb
Fuel Capacity80 gal
Oil Tank Capacity53 gal
Material HandlerYes
Mount TypeBehind Cab
Max Horizontal Reach27 ft
Max Vertical Reach40 ft
Max Lifting Moment166,630 lbs/ft
Max Main Boom Length27 ft
Number of Boom Extensions2 in
OutriggersYes
Number of Outriggers2
Outrigger Span22 ft
Max Operating Pressure4,700 psi
Load Moment IndicatorYes
Crane Rotation430 °
Crane Rotation TypeNon-continuous
Remote Control SystemYes
Top SeatYes
Auxiliary LightingYes
A/CYes
A/C ConditionGood
HeaterYes
Year2018|
ManufacturerPALFINGER|
ModelPK23500A|
Upper Hours3,001|
Serial Number100386867|
ConditionUsed|
Stock NumberJ-DJK4702|
Hours MeterAccurate / Verified|
Product ConfigurationTRUCK MOUNTED KNUCKLE BOOM CRANE|
Operating ConditionOperable|
Truck Year2018|
Truck ManufacturerFREIGHTLINER|
Truck Model114SD|
VIN3ALMG3DV1JDJK4702|
Mileage344,901 mi|
OdometerAccurate / Verified|
State DOTYes|
Horsepower470 HP|
Engine ManufacturerDetroit|
Engine Serial NumberDD13|
Fuel TypeDiesel|
Engine BrakeYes|
TurboYes|
Transmission8LL|
# of Forward Speeds10|
# of Reverse Speeds3|
SuspensionTufTrac|
Twin SteerYes|
Number of Rear AxlesTri|
Wheelbase280 in|
Gross Vehicle Weight RatingClass 8: 33,001 pounds or greater|
Front Axle GWR20,000 lb|
Rear Axle GWR46,000 lb|
Lift AxleYes|
Lift Axle TypeRear|
Length42 ft|
Drive SideLeft Hand Drive|
Wet KitYes|
Flat deckYes|
Lift Capacity13,450 lb|
Fuel Capacity80 gal|
Oil Tank Capacity53 gal|
Material HandlerYes|
Mount TypeBehind Cab|
Max Horizontal Reach27 ft|
Max Vertical Reach40 ft|
Max Lifting Moment166,630 lbs/ft|
Max Main Boom Length27 ft|
Number of Boom Extensions2 in|
OutriggersYes|
Number of Outriggers2|
Outrigger Span22 ft|
Max Operating Pressure4,700 psi|
Load Moment IndicatorYes|
Crane Rotation430 °|
Crane Rotation TypeNon-continuous|
Remote Control SystemYes|
Top SeatYes|
Auxiliary LightingYes|
A/CYes|
A/C ConditionGood|
HeaterYes|